Persian Gulf Bridge shall connect Qeshm Island to the mainland. Once completed it accommodate the two lane Railway and four lane highway to cross over between Qeshm Island to the mainland. Total width of the bridge is approximately 44.1 m.  The overall length of the bridge will be around 2600m (including the two end ramps). Concrete, steel and composite solutions are acceptable for the bridge structure. Clearance height of the bridges from sea levels (MHHWL) should be at least 10 meters.

 a) The connection will provide two railway tracks with a mutual distance of minimum 5.0 m between the centers on the tracks.

 b) On each side of Railway Tracks, Two lane highway shall be provided. Each lane shall be 3.65 m wide and 3.0 mwide emergency lane as well as two hard shoulder/strips of 1.0 m wide shall also be placed.

 c) Providing utilities and supply ways for oil, gas, water, electricity and telecommunication facilities, i.e., cable trays, pipe supports, etc.

 d) Paving of roadways and walkway areas together with drainage, curbs, barriers, road markings, signage, and security fencing and guard rails.

 e) Services and utilities including electrical power supply, electrical substations, fire-fighting hydrant system, fire fighting pump station, helipad for emergency landing, lighting, lightning, telecommunications, IT ducting, CCTV, monitoring system, etc.

 f) In/out-gate complex

 g) Administration, control room and warehouse building of about 300m2 floor area

 h) Custom’s inspection area and shed (about 350 m2)

 i) Car parking area (about 2000 m2)

j) Oily/industrial sewage treatment package.

 k) Cathodic protection system of bridge(s)